Paper; Material Breakdown - Intermec 6820 Series User Manual

Paper

6820 Series 80-Column Printer User's Manual
Use of paper that matches the following specifications ensures
optimum 6820 performance. Variation from these specifications, use
of aged paper, or use of paper exposed to elements such as dirt or
humidity may cause printing problems.
The printer works with 1–3 ply carbonless paper that is single-edge glued
and designed for sprocket feed. Standard paper size is 8.5 x 11" or 8.5 x
12" (241 x 305 mm international). Use 3-ply forms up to a maximum of
0.009 inch (0.23 mm) thick.
A soft, flexible, rubber type cement applied to one perforation strip only is
preferred. The resultant lamination should wrap around a 1-1/4 inch di-
ameter roll without curl or wrinkle.

Material Breakdown

The following tables show the material broken down per ply:
14# CBF (Carbonless Back and Front)
Basis Weight
Caliper
Moisture
Smoothness (RS)
Smoothness (CB)
Brightness (Wht)
Colors available: White, Canary, Pink, Goldenrod, Blue, Green
15# CF (Carbonless Front)
Basis Weight
Caliper
Moisture
Smoothness (RS)
Smoothness (CF)
Brightness (Wht)
Colors available: White, Canary, Pink, Goldenrod, Blue, Green
—
Chapter 1 Introduction
Target Under
14# 13.3
2.9 2.6
5.0 4.0
165 110
270 220
88 86
Target Under
15# 14.43
3.0 2.5
5.0 4.0
140 100
140 100
85 84
Over
14.7
3.2
6.0
230
320
90
Over
15.8
3.2
6.0
180
180
86
7