Intermec 6820 Series User Manual page 56

—
Chapter 4 Using the 6820 Printer Configuration Utility
40
However, if the working configuration is not replaced successfully with the
configuration from the selected file, an error message is displayed inform-
ing you that it was not successful, as shown below. Click OK to return to
the Main Menu without loading a file.
Load Configuration from Printer
This option, selected from the Main Menu, loads a configuration from the
6820 Printer. Click From Printer from the Main Menu to display a warn-
ing message (as shown below) and indicate that the printer's configuration
will overwrite the working configuration. Click OK to overwrite the con-
figuration, otherwise click Cancel to return to the Main Menu without
loading the printer's configuration.
If you click OK, a message is then displayed prompting you to reset the
printer. If the connection is not successful, after approximately 20 seconds,
the following message is displayed.
If you click Yes, repeat the previous steps, starting with Attempting a Con-
nection to the Printer.
If you click No, an error message appears (as shown below) is displayed
informing you that the configuration was not loaded. Click OK to return
to the Main Menu without loading the printer's configuration.
6820 Series 80-Column Printer User's Manual