Perform Master Reset; Set Print Position (Absolute) - Intermec 6820 Series User Manual

6820 Series 80-Column Printer User's Manual
Perform n/216-inch Reverse Line Feed
An immediate reverse line feed of n/216 of an inch is produced. This does
not affect subsequent line feeds. Range of n is 0–255.
Format
Decimal
27 106 n

Perform Master Reset

The Master Reset code initializes the printer, by resetting all special modes
to their default power-up states (see the Factory Defaults paragraph in Ap-
pendix B, "Cross-Reference Tables" for a complete list of settings that are
initialized with this command).
Format
Decimal
27 64

Set Print Position (absolute)

The print head is moved to an absolute horizontal position on the paper.
The distance is specified, in dots from the left margin to the new print
position (at which subsequent characters are printed). Each dot represents
1/60 of an inch. The values for n1 and n2 determine the distance, as fol-
lows:
number of dots = n1 + (n2 * 256)
Maximum position is 480. The previous contents of the current print
buffer is printed.
If the position specified would have placed the print head outside the cur-
rent margins, this function is ignored and the previous setting remains ef-
fective. This function is also ignored in right, center, and full justification
modes.
Format
Decimal
27 36 n1 n2
Chapter 5
Hex
1B 6A n
Hex
1B 40
Hex
1B 24 n1 n2
—
Control Code Definitions
ASCII
ESC "j" n
ASCII
ESC "@"
ASCII
ESC "$" n1 n2
67