Set Service Name; Connectable On/Off: "On" Or "Off; Specify Page Scan Timing; Enable Discoverable - Intermec 6820 Series User Manual

6820 Series 80-Column Printer User's Manual

Set Service Name

Command S2<Service Name>
Description Sets the service friendly name to send to the remote Bluetooth device
in response to a service discovery request. The length of the service
name is limited to 32 bytes.
Definition Profile Name — Text name entered into the SDP record for the serial
port profile
Default "Wireless Printer"
Example "S3Acme Printer<CR>"

Connectable On/Off: "ON" or "OFF"

Command C0 <ON|OFF><CR>
Description Sets the device into "connectable" mode
Example "C0OFF<CR>" — Become non-connectable
"C0ON<CR>" — Become connectable

Specify Page Scan Timing

Command C1<Page_Scan_Interval>,<Page_Scan_Window><CR>
Description Sets the Page Scan timing parameters
Default 4096,18
Example "C11024,512<CR>"
Note: To enable scanning, the values for Interval and Window must be in the range of 18 to
4096. The Window value must be less than the Interval value. Both values must be zero to
disable scanning.
Note: Page scan timing is described in the Bluetooth V1.1 Core Specifications; for up-to-date
information, see: The Bluetooth Specification.
Note: Modification of the Page Scan Timing can improve connection times, but may adverse-
ly affect battery performance.

Enable Discoverable

Command D0 <ON|OFF><CR>
Description Sets the device into "discoverable" mode
Example "D0OFF<CR>" — Become non-discoverable
"D0ON<CR>" — Become discoverable
—
Appendix A Bluetooth Configuration Commands
135