Intermec 6820 Series User Manual page 102

—
Chapter 5 Control Code Definitions
86
Printing of Codes 128-255 function, before these codes can print. In both
ranges, only the following codes can redefine as printable characters. Codes
not listed, within the range (00h–1Fh), print as standard control codes.
Codes not listed, within the range (80h-9Fh), are converted to a control
code in the range of (00h-1Fh), by subtraction of 80h. Note this function is
only useful with the default SBCS character set.
Format
Decimal
27 73 n
Printable Code Expansion Characters
Hex ASCII Hex
00 NUL 11
01 SOH 15
02 STX 16
03 ETX 17
04 EOT 1C
05 ENQ 1D
06 ACK 1E
10 DLE 1F
Enable Printing of Character Graphics
The printing of character graphics is enabled, until disabled with the Dis-
able Printing of Character Graphics function. Note this function is only useful
with the default SBCS character set.
Format
Decimal
27 116 1
For character values from 0 to 31 (00h–1Fh):
S When the default SBCS codepage is selected, the FX-86e IBM character
graphics symbol set is printed.
S When other SBCS codepages are selected, the codes (00h-1Fh), listed
above in the Printable Code Expansion Characters table are printed.
For character values from 32 to 126 (20h–7Eh):
S When the default SBCS codepage is selected, the selected international
character set is printed.
S When other SBCS codepages are selected, the international character set
selection is not in effect.
Hex
1B 49 n
ASCII Hex ASCII
DC1 80 none
NAK 81 none
SYN 82 none
ETB 83 none
FS 84 none
GS 85 none
RS 86 none
US 90 none
Hex
1B 74 01
6820 Series 80-Column Printer User's Manual
ASCII
ESC "I" n
Hex ASCII
91 none
95 none
96 none
97 none
9C none
9D none
9E none
9F none
ASCII
ESC "t" (1)