Alpha Keyboard - Intermec 6820 Series User Manual

6820 Series 80-Column Printer User's Manual
Chapter 4
Default Printer Settings
These settings are used when Restore Defaults to Printer is selected:
Zero Print Option
Autofeed Configuration
Protocol
Parity
Bit Rate
For other printer defaults, refer to the Printer Defaults paragraph in Appen-
dix B, "Cross-Reference Tables."

Alpha Keyboard

The Alpha button, on either the File Open window or the File Save As
window, brings up the alpha keyboard onscreen for you to enter text.
Returning the File Name to the Previous Dialog Window
After selecting all of the needed text, click Save to return the text to the
window where needed. Click Cancel to exit without saving the text. The
following confirmation message appears. Click OK to return to the pre-
vious window without the entered text, or click Cancel to stay with the
alpha keyboard.
—
Using the 6820 Printer Configuration Utility
Slash all zeros (zeros are printed with a slash)
CR (carriage return at end of line without line feed)
NPCP
N/A (for NPCP)
19.2K
49