Printer Dimensions
Fixed Mount Printer Dimensions
Configuration (with deep paper tray)
with 61XX Holder Side Mount
with 4000 Sesries, 62XX, 600 Series, 700 Series, or CK60
Holder Side Mount
with 61XX Holder Top Mount
with 4000 Series, 62XX, 600 Series, 700 Series, or CK60
Holder Top Mount
Portable Printer Dimensions
Configuration
with handle, 61XX Holder Top Mount, and Deep Paper Tray
with handle, 61XX Holder Top Mount, and Shallow Paper Tray
with handle, 4000 Series, 62XX, 600 Series, 700 Series, or CK60
Holder Top Mount, and Deep Paper Tray
with handle, 4000 Series, 62XX, 600 Series, or 700 Series, or CK60
Holder Top Mount or Fill Plate, and Shallow Paper Tray
Remote Connections
6820 Series 80-Column Printer User's Manual
Below are the three most common printer configurations:
Wall Mount Printers
See the 6820 Printer Installation Instructions P/N: 962-018-016 for Wall
Mount assembly dimensions. Below are the width, height, and depth di-
mensions for the Wall Mount Printer.
Width
Length
13.25"
10.5"
(33.7 cm)
(26.7 cm)
Fixed Mount Printers
The base of the Fixed Mount Printer is 12.75" (32.5 cm) wide by 14"
(35.5 cm) front to back. The upper portion varies according to the config-
urations shown in the following table.
Portable Printers
The Portable Printer may come with a handle, an ac foot, or with a termi-
nal holder top mount. Note the ac foot adds 2.5" (6.35 cm) to the width.
A printer and a computer, using the supplied serial cable, can operate
while up to 30 feet (9 meters) apart.
Chapter 1
Depth
4.5"
(11.4 cm)
Width
Length
20.25"
14.5"
(51.4 cm)
(36.8 cm)
18.5"
14.5"
(47.0 cm)
(36.8 cm)
16.75"
16.75"
(42.5 cm)
(42.6 cm)
15.0"
16.75"
(38.1 cm)
(42.6 cm)
Width
Length
16.5"
16.75"
(41.9 cm)
(42.6 cm)
16.75"
16.75"
(42.5 cm)
(42.6 cm)
15.0"
16.75"
(38.1 cm)
(42.6 cm)
16.5"
15.0"
(41.9 cm)
(38.1 cm)
—
Introduction
Depth
7.5"
(19.1 cm)
8.0"
(20.3 cm)
7.5"
(19.1 cm)
8.0"
(20.3 cm)
Depth
8.0"
(20.3 cm)
7.5"
(19.1 cm)
8.0"
(20.3 cm)
5.13"
(13.0 cm)
9