Auto-Transmit 3, Enable; Auto-Transmit 1, 2, And 3, Disable; Control Panel Access Permission, Set; Cutter, Enable Or Disable - Intermec 3440 User Manual
Bar code label printer
Hide thumbs
Also See for 3440:
- User manual (20 pages) ,
- Developer's manual (116 pages) ,
- Installation and operation manual (41 pages)
Table of Contents
Advertisement
3440 Bar Code Label Printer User's Manual
Auto-Transmit 3, Enable
Purpose:
Enables auto-transmit level 3.
Syntax:
<ESC>e
The status response codes are as follows:
<HT>
<SOH>
<RS>
Notes:
The printer transmits a status response when this condition occurs. This
command becomes effective upon execution.
Auto-Transmit 1, 2, and 3, Disable
Purpose:
Disables the auto-transmit status's.
Syntax:
<ESC>k
Notes:
This command becomes effective upon execution.
Control Panel Access Permission, Set
Syntax:
<SI>A n
Notes:
The 3440 printer ignores this command.
Cutter, Enable or Disable
Syntax:
<SI>c n
Notes:
The 3440 printer ignores this command.
6-40
*1233*
FG 9pt Italic
Imager overrun
Printing is complete and the buffer is empty
Insufficient RAM for printing or storage
FranklinGothic
*1233*
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
