Control Panel; Indicators; Buttons - Intermec 6820 User Manual

Introduction

Control Panel

The printer control panel has four indicators in the top row
and three buttons in the bottom row. Three indicators
blink when there is a problem. The fourth indicator lights
up when the printer is active. The three buttons adjust and
align the paper.

Indicators

"
"
"
"

Buttons

"
"
1-8 6820 Printer User's Guide
PAPER OUT
The printer is out of paper.
HEAD JAM
The print head is jammed and cannot move.
LOW BATT
The internal battery voltage, the vehicle battery volt-
age, or the power module voltage is too low.
Power
This stays lit while the printer is in active mode, or
awake. When the printer is in sleep mode, or without
power, this is dark.
FORM FEED
Press this button to feed the paper into the printer
mechanism or when the printer should advance to the
next form. If the printer ran out of paper, press this
button to initiate automatic paper loading.
SET PAGE
Press this button to signal the beginning of the page
to the printer after you have made the appropriate
paper adjustments; or to set the linefeed counter to
zero and move the print head to its home position. In
"Paper Out" conditions, press this button to clear the
Paper Out error before printing can resume.
SECTION 1