Understanding The Control Panel - Intermec PW50 User Manual

Chapter 1 — Using the PW50 Workboard Printer

Understanding the Control Panel

4
The PW50 control panel contains two buttons and four LED
indicators. Use the two buttons to perform functions on the PW50
printer. See the following tables to understand the buttons and LED
indicators.
Note: The Intermec Ready-to-Work™ indicator and the Status LED
also indicate the status of the printer modes. For more information,
see "Understanding the Printer Modes" on page
Standby button
Communications
PW50 Control Panel: Use this illustration to familiarize yourself with the
buttons and LEDs on the PW50.
Understanding How to Use the PW50 Buttons
Button Name
Standby
(Power)
Status
Intermec
Ready-to-Work
indicator
Functions
Press to put the printer in Standby mode. In Standby
mode, power to the radio is turned off and all
communications ports (USB, COM1, and Bluetooth)
are turned off.
Press to turn the printer back on and put the printer in
Ready mode.
Press and hold for more than 2 seconds to enable or
disable Bluetooth communications.
PW50 Workboard Printer User's Guide
19.
Feed button
Battery