Gps Operation; Checking Your Location; D Displaying Location Data - Icom ID-52E PLUS Basic Manual

7

GPS OPERATION

NOTE: The built-in GPS receiver cannot calculate its location if it cannot receive signals
from the GPS satellites. Refer to page iv for details.

■ Checking your location

You can check your current location.
If you transmit while displaying the GPS POSITION screen, the screen closes.
To check your current location or caller's location while transmitting, push [QUICK], then
select "GPS Position."

D Displaying Location Data

1. Confirm the GPS icon is displayed.
2. Push [QUICK].
3. Select "GPS Position."
• The GPS POSITION screen is displayed.
4. Push D-pad().
• Changes between the MY (My position), RX (Received position), MEM (GPS Memory
position), and ALM (GPS Alarm position) screen.
5. Push [CLR].
• Returns to the standby screen.
About the GPS POSITION screen
Your course heading
Course direction
Displays My position.
29
(Example: Displays GPS Memory position.)
Latitude
Longitude
Grid Locator
Altitude
Speed
Time