Default Snmp Settings; Configuring Snmp; Configuring Snmp Users - Cisco Nexus 5600 Series Configuration Manual

Default SNMP Settings

Default SNMP Settings
Table 25: Default SNMP Parameters
Parameters
license notifications
linkUp/Down notification type

Configuring SNMP

Configuring SNMP Users

The commands used to configure SNMP users in Cisco NX-OS are different from those used to configure
Note
users in Cisco IOS.
Procedure
Step 1
Step 2
Step 3
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
154
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
switch(config)# snmp-server user name
[auth {md5 | sha} passphrase [auto] [priv
[aes-128] passphrase] [engineID id]
[localizedkey]]
Example:
switch(config)# snmp-server user Admin
auth sha abcd1234 priv abcdefgh
switch# show snmp user
Example:
switch(config) # show snmp user
Default
Enabled
ietf-extended
Purpose
Enters global configuration mode.
Configures an SNMP user with authentication and
privacy parameters.
The passphrase can be any case-sensitive,
alphanumeric string up to 64 characters.
If you use the localizedkey keyword, the passphrase
can be any case-sensitive, alphanumeric string up to
130 characters.
The engineID format is a 12-digit, colon-separated
decimal number.
(Optional)
Displays information about one or more SNMP
users.
Configuring SNMP
OL-31641-01