Defining Aaa Server Groups - Cisco Catalyst 2960-X Security Configuration Manual

Defining AAA Server Groups

Command or Action
Step 7
end
Example:
Switch(config)# end
Step 8 show running-config
Example:
Switch# show running-config
Step 9 copy running-config startup-config
Example:
Switch# copy running-config
startup-config
Related Topics
RADIUS Login Authentication, on page 70
RADIUS Server Host, on page 69
Defining AAA Server Groups
You use the server group server configuration command to associate a particular server with a defined group
server. You can either identify the server by its IP address or identify multiple host instances or entries by
using the optional auth-port and acct-port keywords.
Follow these steps to define AAA server groups:
SUMMARY STEPS
1. enable
2. configure terminal
3. radius server name
4. address {ipv4 | ipv6} {ip-address | hostname} auth-port port-number acct-port port-number
5. key string
6. end
7. show running-config
8. copy running-config startup-config
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
88
Purpose
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
Configuring RADIUS
OL-29048-01