Tips regarding piezoelectric measurement technology
9.2
Available models and information on installation
HBM has two different piezoelectric force sensor designs available: The force
washer CFW and the force transducer CFT.
Fig. 9.3
CFW and CFT force transducers
9.2.1
CFT force transducer
The CFT force transducers are calibrated and are delivered with calibration
certificates. As these force transducers are already pre‐stressed internally,
they are suitable for immediate application. Renewed calibration of the
measurement chain is not necessary.
9.2.2
CFW force washer
Force washers must always be mounted with an initial stress. This also applies
for the piezoelectric CFW force washers. After mounting, the force washers lie
30
A02559_04_YI0_01 HBM: public
CMA