Roller Set - Beckhoff XTS Operating Instructions Manual

Roller set

12.8
50 mm
12.8.1
55 mm
12.8.2
Version: 3.1
The roller sets are available for replacing worn or damaged guide
rollers of the movers. For more information on replacing the guide
rollers, see chapter "Maintenance work on the mover", [Page 140].
12.8.1
ZX9011-0050
The roller set is available for the following movers with 6 guide
rollers:
• AT9011-0050-0550
• AT9011-0050-1550
Scope of supply
• 2 x cylindrical roller with short shoulder bolt
• 4 x cylindrical roller with long shoulder bolt
• Adjusting washers and nuts
ZX9012-0050
The pre-assembled roller set is available for the following movers
with 12 guide rollers:
• AT9012-0050-0550
• AT9012-0050-1550
Scope of supply
• 2 x cylindrical roller
• 2 x conical roller
• 4 x cylindrical roller with spacer ring
• 4 x conical roller with cone to the bolt head
• Shoulder bolts, adjusting washers and nuts
12.8.2
ZX9014-0055
The roller set is available for the following movers with 4 guide
rollers and 2 spring-loaded guide rollers:
• AT9014-0055-0550
• AT9014-0055-1550
Scope of supply
• 2 x cylindrical roller with bearing pin and set screw
• 4 x cylindrical roller with shoulder bolt
• Adjusting washers and nuts
XTS
Accessories
─── 191