Adapter For Cables; Connector Cards; Alignment Gauge - Beckhoff XTS Operating Instructions Manual

Adapter for cables

12.2

Connector cards

12.3

Alignment gauge

12.4
Version: 3.1
12.2
ZK7A30-AS00-Axxx
The ENP cable adapter suitable for drag chains is available in two
lengths and is required for connecting the ZK7A30-3031-Bxxx cable
to the control cabinet.
Plug: B23 square flange EtherCAT-coded to RJ45 and open end
Bending cycles: 3 million
Axxx – cable length
A005 – 0.5 m
A001 – 1 m
12.3
ZX2000-0100
Connector cards and seals are available for exchange or replace-
ment.
Scope of supply
• 5 x connector card
• 5 x seals
12.4
ZX2000-0500
The alignment gauge is available for aligning standard straight XTS
modules.
XTS
Accessories
─── 189