Accessories
70 mm
12.8.3
Torx key T20
12.9
192
───
12.8.3
ZX9011-0070
The roller set is available for the following movers with 6 guide
rollers:
• AT9011-0070-0550
• AT9011-0070-1550
Scope of supply
• 4 x cylindrical roller with short shoulder bolt
• 2 x cylindrical roller with long shoulder bolt
• 8 x sealing plugs
• Adjusting washers and nuts
ZX9014-0070
The roller set is available for the following movers with 4 guide
rollers and 2 spring-loaded guide rollers:
• AT9014-0070-0550
• AT9014-0070-1550
Scope of supply
• 4 x cylindrical roller with shoulder bolt
• 2 x cylindrical roller with bearing pin and set screw
• 8 x sealing plugs
• Adjusting washers and nuts
12.9
ZX9017-0000
The T20 Torx key is available for replacing the guide rollers on the
AT9012-0050-x550 mover.
Suitable for:
• Torx® screws
XTS
Version: 3.1