Maintenance And Cleaning; Cleaning Agents - Beckhoff XTS Operating Instructions Manual

Cleaning agents

10.1
Version: 3.1
WARNING
Ensure safe condition for cleaning work
Basically, electronic devices are not fail-safe. The condition is al-
ways safe when the unit is switched off and not energized. For
cleaning work, bring the connected motors and the machine into
a safe state.
Carrying cleaning work during operation can lead to serious or fa-
tal injuries.
Do not immerse or spray XTS components
Wipe off the XTS components only with a cleaning agent and a
cloth.
Cleaning by immersion can lead to damage to the XTS compo-
nents and surfaces as well as to leak-tightness problems due to im-
permissible solutions.
Beckhoff recommends regular maintenance in order to prevent per-
manent damage to the system. Contamination, dust or chips can
have a negative effect on the function of the components. In the
worst case, contamination can lead to failure. Therefore, clean and
maintain the components at regular and necessary intervals.
Carefully clean the components with a damp cloth or brush.
Isopropanol cleaning agent can be used for cleaning.
XTS

Maintenance and cleaning

─── 137