Replacing The Encoder Flag - Beckhoff XTS Operating Instructions Manual

Maintenance work on the mover

Replacing the encoder flag

11.7
Technical aids
11.7.1
Disassembly
11.7.2
186 ───
The encoder flags are part of the magnetic plate sets [+] and are in-
cluded in the following thicknesses:
• 1.0 mm
• 1.2 mm, mounted on movers AT901x-00xx-x550
• 1.4 mm
• 1.6 mm, mounted on magnetic plate sets AT9001-xxxx-1640
• 1.8 mm
The mounted encoder flag can be exchanged for one of the en-
closed encoder flags if required.
You will need the following tools to remove the encoder flag and re-
install it:
• Allen key 2 mm
11.7.2
► Remove screws [1]
► Remove the encoder flag [2]
XTS Version: 3.1