Magnetic Plate Set - Beckhoff XTS Operating Instructions Manual

Accessories

Magnetic plate set

12.12
Mover
12.12.1
194 ───
The magnetic plate set for mover and Mover 1 consists of two mag-
netic plates. A 1.6 mm thick encoder flag is mounted on a magnetic
plate. Each magnetic plate set contains encoder flags with the fol-
lowing thicknesses:
• 1.0 mm
• 1.2 mm
• 1.4 mm
• 1.8 mm
Beckhoff recommends using the 1.6 mm thick encoder flag for exter-
nal movers. 1.2 mm thick encoder flags are installed on Beckhoff
movers and Mover 1 at the factory.
12.12.1
4-pole
The magnetic plate set consists of two magnetic plates with four
magnets.
The magnetic plate set for Beckhoff 50 mm, 55 mm and 70 mm
movers as well as for external movers can be obtained via the fol-
lowing order number:
• AT9001-0450-1640
The distance from the center of the mover to the center of the mover
is 50 mm.
5-pole
The magnetic plate set consists of two magnetic plates with five
magnets.
The magnetic plate set for Beckhoff 50 mm, 55 mm and 70 mm
movers as well as for external movers can be obtained via the fol-
lowing order number:
• AT9001-0550-1640
The distance from the center of the mover to the center of the mover
is 60 mm.
7-pole
The magnetic plate set consists of two magnetic plates with seven
magnets.
You can obtain the magnetic plate set for external movers via the
following order number:
• AT9001-0775-1640
The distance from the center of the mover to the center of the mover
is 85 mm.
XTS Version: 3.1