Mechanical installation
Mounting the movers
7.4
Rail on support [+]
7.4.1
Mounting
112
───
Better running characteristics
Beckhoff recommends applying a small amount of grease to the
running surface on the guide rails of the entire system before
mounting the movers and commissioning the XTS.
Beckhoff recommends the following lubricants:
• Vaseline when using movers without spring-loaded rollers
• Food grade grease NSF-H1 when using movers with spring-
loaded rollers
► Apply a small quantity of grease to the running surfaces [1] of
the guide rails on both sides of the entire system
A pre-assembled lock is available for installing the movers on the
guide rails. The lock must be replaced by a rail on support [+] during
the assembly.
► Remove screws [1]
► Remove lock [2]
► Insert rail on support [1]
► Insert screws [2] and hand-tighten them
XTS
Version: 3.1