Table of Contents
Advertisement
3 About the box
For the installer
3
About the box
Keep the following in mind:
▪ At delivery, the unit MUST be checked for damage and
completeness. Any damage or missing parts MUST be reported
immediately to the claims agent of the carrier.
▪ Bring the packed unit as close as possible to its final installation
position to prevent damage during transport.
▪ Prepare in advance the path along which you want to bring the
unit to its final installation position.
3.1
To unpack and handle the fan coil
unit
Use a sling of soft material or protective plates together with a rope
when lifting the unit. This to avoid damage or scratches to the unit.
1 Lift the unit by holding onto the hanger brackets without
exerting any pressure on other parts, especially on drain piping
and thermal insulation.
NOTICE
Do NOT lift the unit by the valve actuators (a).
Installation and operation manual
6
a
NOTICE
Do NOT lift the unit by the drain pan socket (b).
NOTICE
Do NOT lift the unit by subdrain pan (c).
3.2
To remove the accessories from
the fan coil unit
a
b
3x
1x
e
f
1x
1x
a
Screw M4 for sub drain pan 2x and drain hose 1x
b
Drain hose
c
Screw M5 for FWECSAP 2x
d
Gasket
e
Sub drain pan
f
Installation and operation manual
g
Thermal insulation for valves (2 pipe: 1x and 4 pipe: 2x)
(*)
h
Flare cap
*
Only models with factory mounted valve
b
c
c
d
2x
4x
g
h
FWE-F
Fan coil units
3P756931-1 – 2023.11
Advertisement
Table of Contents
