Hardware Options
RKMT-J05
Equipment Rack
Brackets Kit
Eight M3x6mm truss
head screws
BRKT-J23 Wall
Brackets Kit
The following hardware options for the x330 Switches are sold separately.
Installing the x330-10GTX Switch in a standard 19-inch equipment rack
requires the RKMT-J05 brackets kit. Refer to Figure 19. For instructions,
refer to Chapter 3, "Installing the x330-10GTX Switch in an Equipment
Rack" on page 57.
Two handles
Two long brackets
Eight M4x6mm truss
Figure 19. RKMT-J05 Equipment Rack Brackets Kit for the x330-10GTX
The x330-10GTX Switch is installed on a wall with the BRKT-J23 wall
brackets kit. Refer to Figure 20. For instructions, refer to Chapter 6,
"Installing the x330-10GTX Switch on a Wall" on page 75.
Figure 20. BRKT-J23 Wall Brackets Kit for the x330-10GTX Switch
x330 Series Installation Guide for Standalone Switches
head screws
Switch
Two short brackets
Two cable trays
Ten Tie Wraps
51