Table of Contents
Advertisement
HD9510UC High Definition Upconverter Manual
values for the selected parameter. The various parameter values that are not currently selected will NOT
be blinking. When you have stopped at the desired value, press the SELECT key to save your selection.
The value shown will begin blinking; indicating that it has become the current value. To move back to the
top level in the menu press the SETUP key.
You can select other parameters from the top level of the menu by using the ↑ & ↓ keys, followed by the
SELECT key. Alternately you can exit the Setup menu by pressing the SETUP key.
Each of the menu items is described in the following sections, with an explanation of what each choice
does.
3.3.1. Configuring The Output Video Format
The OUTPUT FORMAT menu is used to select the output video format of the Upconverter.
OUTPUT FORMAT
1080i
1035i
720p
480p
3.3.2. Selecting The Output Aspect Ratio Format
The OUTPUT ASPECT menu allows the user to select how the 4:3 aspect ratio standard definition image
will be converted to the 16:9 aspect ratio high definition image.
OUTPUT ASPECT
Not Applicable
Page 3-4
The field rate of the 1080I and 1035I interlaced formats is 59.94.
The frame rate of the 720p and 480p progressive formats is 59.94.
When the OUTPUT FORMAT menu item is set to 480P the complete input
image is placed in the top left corner of the HD raster.
Revision 1.1.1
OPERATION
Advertisement
Table of Contents
