Library and Device Status
Indicator Description
2
Userid
3
Library
4
Device
health
icon
Communications Failures
If the SL Console loses communication with the library controller, after about 30–60
seconds, the heartbeat monitor turns gray, then red, and the following error message
appears:
Heartbeat message not received from the library controller.
You must log off from the SL Console and then log on again to restore communication.
Viewing Library Information
The System Details > Library menu provides options for viewing and modifying
library information, such as library configuration and status and drive auto cleaning
configuration. For complete details, see the following topics:
"Library Management Tasks" on page 66
■
"Drive Cleaning Tasks" on page 105
■
60 SL500 User's Guide • July 2008
An error. This icon appears when the server response takes
longer than 30 seconds.
Userid currently logged in to the SL Console.
Library to which the SL Console is connected, and a graphical
representation of the current health of the library and its devices. Possible
icons are:
All library devices are functioning normally.
A warning. One or more devices in the library is offline or
operating in a degraded state.
An error. One or more devices in the library has experienced a
failure.
Current status of the indicator device. When the library indicator shows a
warning or error, use this indicator to determine which devices are
experiencing abnormal conditions.
Revision: KA • 96116