Preparing The Sparcstorage Library; Inspecting The Sparcstorage Library - Sun Microsystems SPARCstorage Library Installation Manual

2.1 Inspecting the SPARCstorage Library

!
Preparing the SPARCstorage
Library
Warning – The tape library shipping weight is approximately 90 pounds (40.86
kg). Use safe lifting procedures when unpacking and installing the tape library
to prevent damage to the equipment or injury to personnel.
After unpacking, Inspect the tape library for evidence of damage. If damaged,
keep all contents and packing materials for the carrier's agent to inspect and
do not proceed with the installation. Once you have unpacked the tape library
from the shipping carton, check the contents against the packing slip to make
sure you have all of the following items:
•
SPARCstorage Library with at least one tape drive installed
•
Power cord
•
SCSI cable
•
Tape cartridge holder and top cover
•
Cleaning cartridge
•
Regulated SCSI terminator
•
Box of data tapes
•
Manuals
•
SCSI jumper plug
•
Bezel
•
Slide rails and attaching hardware
•
Locking brackets and attaching hardware
•
Key
2
2-1