Pre-Installation Checks; Plan The Internet Connection; Download The Installer Toolkit; Box Contents - enphase AC Combiner Box Installation Manual

Pre-installation Checks

Review the following pre-installation checks before you install the AC Combiner Box.

Plan the Internet Connection

To use the Enlighten web-based monitoring and analysis software, additional requirements are:
Internet connection for the Envoy-S through a traditional router or modem or Enphase Mobile
•
Connect (Enphase model CELLMODEM-01). Decide whether to connect the Envoy-S to the
Internet using integrated Wi-Fi, an Enphase Mobile Connect modem, or using Ethernet cable with
or without a power line communication (PLC) bridge.
One of the following Web browsers with cookies enabled: Chrome 5 or higher, Firefox 11 or
•
higher, Internet Explorer (IE) 9 or higher, or Safari 5 or higher

Download the Installer Toolkit

The Enphase Installer Toolkit is a mobile app for iOS and Android devices that allows
installers to configure the system while onsite, eliminating the need for a laptop and
improving installation efficiency.
Download the Enphase Installer Toolkit mobile app and open it to log in to
•
your Enlighten account. With this app, you can connect to the Envoy to
track system installation progress. To download, go to
enphase.com/installer-toolkit
To run the Installer Toolkit app, you need either of the
•
following mobile devices:
An Android mobile device running Android version
−
4.2 or later, or
An iOS device running iOS 7.0 or later, specifically an iPhone 4 or later
−
or an iPod Touch 5th generation

Box Contents

Check the shipping box for the following items:
Enphase AC Combiner Box with Envoy-S
•
Ferrite bead to attach to your Ethernet Cable, if used
•
The Enphase AC Combiner Box Quick Install Guide
•

Required Items

Tools, including screw driver, pliers, torque wrench, etc.
•
Overcurrent protection in accordance with NFPA 70-2014, §705.12(D)
•
Suitable mounting hardware: use screws that are long enough to secure the unit to the vertical
•
mounting surface
75°C or 90°C copper conductors, rated for wet locations
•
UL listed rain-tight or wet location hubs for wire entry into the enclosure
•

Optional Items

Make sure you have the following optional items, if needed:
Two consumption metering split-core CTs (order two CTs: Enphase CT-200-SPLIT)
•
8
or scan the QR code:
© 2016 Enphase Energy Inc.
AC Combiner Box Installation
Enphase Installer
Toolkit mobile app
141-00030 Rev 02