Installing The Fork Legs - Husqvarna FC 450 2020 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.10
56
S02314-10
A00506-10

Installing the fork legs

H01182-10
S02314-11
(FC 450, FX 450)
–
3
Loosen screws . Remove the left fork leg.
–
4
Loosen screws . Remove the right fork leg.
(ROCKSTAR EDITION)
–
3
Loosen screws . Remove the left fork leg.
–
4
Loosen screws . Remove the right fork leg.
Main work
–
Position the fork legs.
1
Air bleeder screw
the front.
A
Valve of the left fork leg faces the front.
Info
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the top)
must be flush with the upper edge of the upper triple
clamp.
The air suspension is located in the left fork leg. The
pressure and rebound damping is located in the right
fork leg.
(FC 450, FX 450)
–
2
Tighten screws .
Guideline
Screw, top triple
clamp
–
3
Tighten screws .
Guideline
Screw, bottom
triple clamp
of the right fork leg is positioned to
M8 17 Nm (12.5 lbf ft)
M8 12 Nm (8.9 lbf ft)