Safety Advice; Use Definition - Intended Use; Degrees Of Risk And Symbols; Tampering Warning - Husqvarna 125 XC-W 150 2017 Owner's Manual

Table of Contents

Advertisement

2

SAFETY ADVICE

Use definition – intended use
2.1
(All EXC/EXC Six Days models)
KTM sport motorcycles are designed and built to withstand the normal stresses and strains of competitive use. The motorcycles
comply with currently valid regulations and categories of the top international motorsport organizations.
Info
The motorcycle is authorized for public road traffic in the homologated (reduced) version only.
In the derestricted version, the motorcycle must be used only on closed off properties remote from public road traffic.
This motorcycle is designed for use in offroad endurance competition and not primarily for use in motocross.
(All XC‑W/XC‑W Six Days models)
KTM sport motorcycles are designed and built to withstand the normal stresses and strains of competitive use. The motorcycles
comply with currently valid regulations and categories of the top international motorsport organizations.
Info
Your motorcycle is not approved for use on public roads.
This motorcycle is designed for use in offroad endurance competition and not primarily for use in motocross.
2.2
Safety advice
A number of safety instructions need to be followed to operate the vehicle safely. Therefore, read this manual carefully. The safety
instructions are highlighted in the text and are referred to at the relevant passages.
Info
The vehicle has various information and warning labels at prominent locations. Do not remove information/warning labels. If
they are missing, you or others may not recognize dangers and may therefore be injured.
2.3

Degrees of risk and symbols

Danger
Indicates a danger that will immediately and invariably lead to fatal or serious permanent injury if the appropriate measures are
not taken.
Warning
Indicates a danger that is likely to lead to fatal or serious injury if the appropriate measures are not taken.
Caution
Indicates a danger that may lead to minor injuries if the appropriate measures are not taken.
Note
Indicates a danger that will lead to considerable machine and material damage if the appropriate measures are not taken.
Warning
Indicates a danger that will lead to environmental damage if the appropriate measures are not taken.
2.4

Tampering warning

Tampering with the noise control system is prohibited. Federal law prohibits the following acts or the causing thereof:
1 The removal or rendering inoperative by any person other than for purposes of maintenance, repair, or replacement, of any device
or element of design incorporated into any new vehicle for the purpose of noise control prior to its sale or delivery to the ultimate
purchaser or while it is in use, or
2 the use of the vehicle after such device or element of design has been removed or rendered inoperative by any person.
Among those acts presumed to constitute tampering are the acts listed below:
6

Advertisement

Table of Contents
loading

Table of Contents