Mounting The Anti-Tilt Bracket - Fujitsu PRIMERGY TX150 S6 Operating Manual

Setting up the floorstand model
4.2.1

Mounting the anti-tilt bracket

I
For safety reasons (risk of tipping), the anti-tilt bracket must be fitted on
the rear of the server on floorstand models with hot-plug power supply
units.
Figure 2: Mounting the anti-tilt bracket
Ê Position the server on the anti-tilt bracket in the way that the rubber feet of
the server fit into the openings of the bracket (1).
38 Operating Manual
Hardware installation
TX150 S6