Removing The Anti-Tilt Bracket - Fujitsu PRIMERGY TX2550 M5 Upgrade And Maintenance Manual

Figure 58: Installing the anti-tilt bracket (B)
▶ Fasten the anti-tilt bracket on the rear of the server with two knurled thumb
screws.
4.13.1

Removing the anti-tilt bracket

▶ Loosen the two knurled thumb screws on the anti-tilt bracket (see
Figure 58).
▶ Remove the anti-tilt bracket from the rear of the server.
TX2550 M5 Upgrade and Maintenance Manual
Basic hardware procedures
105