Transporting With A Truck - MacDon A30-S Operator's Manual

Pull-type mower conditioners, self-propelled auger headers
Table of Contents

Advertisement

6.8.2.2

Transporting With a Truck

CAUTION
Do not tow with a vehicle weighing less than
7500 lb (3400 kg). Ensure that the capacity
of the towing vehicle is sufficient to maintain
control.
If the windrower is in transport mode, proceed
as follows.
Otherwise, see 6.8.2.3 Preparing
Windrower for Transport.
B
A
a. Store hydraulic hoses on the APT as shown
opposite.
b. Lower hook (A) and place driveline in hook.
c. Remove the forward half (B) of driveline and
store in truck for transport.
C
d. Position towing adapter (C) on APT and secure
with pins (D).
e. Attach mower conditioner to truck.
f.
Remove jack from working position and store on
APT. Secure with pin.
Form # 169000
OPERATION
g. Wrap safety chain around APT and attach to
h. Connect electrical harness (F).
i.
j.
D
40
E
truck frame (E).
Check local laws for width regulations and
lighting
or
marking
transporting on roads.
Do not exceed 20 mph (32 km/h).
F
requirements
before
Model Year - 2009

Advertisement

Table of Contents
loading

This manual is also suitable for:

A30-dA40-d

Table of Contents