Sun Microsystems Fire V490 Setup And Rackmounting Manual page 22

c. Move the bracket forward or backward on the slide assembly until you have
the correct position to accommodate the depth of the rack.
Note – If necessary, fully remove the three lock nuts and the back mounting bracket
from the slide assembly to adjust the back mounting bracket to the depth of the rack.
Hold the back mounting bracket on the slide assembly and move it forward or
backward until you have the correct position to accommodate the depth of the rack.
Secure the back mounting bracket to the slide assembly with the three lock nuts.
d. Loosely tighten the three lock nuts that secure the back mounting bracket to
the slide assembly. Do not fully tighten the lock nuts.
e. Repeat these steps to adjust the other back mounting bracket.
12 Sun Fire V490 Server Setup and Rackmounting Guide • August 2004
Slide assembly
Back mounting bracket