Sun Microsystems Fire V490 Setup And Rackmounting Manual page 46

5. Attach the left hinge of the cable management arm to the hinged bracket on the
slide assembly.
The cable management arm is included in the rack kit.
a. Position the cable management arm so that the two metal fingers in the first
section are facing the back of the server and the three metal fingers in the third
section of the cable management arm are facing away from the server.
b. Go to the back of the cabinet. Locate the hinged bracket on the left slide
assembly as viewed from the rear.
Left
hinge
Fingers
36 Sun Fire V490 Server Setup and Rackmounting Guide • August 2004
Hinged
bracket