Install The Server Into A Populated Rack - Sun Microsystems Fire V490 Setup And Rackmounting Manual

Install the Server Into a Populated Rack

1. Attach the mounting brackets to the chassis using three M4 screws for each
bracket. See "Attach the Mounting Brackets to the Chassis" on page 24
instructions.
2. Slide the server into the open position in the rack.
Allow six rack unit spaces (10.5 in/26.67 cm) per server.
3. Using a Phillips No. 2 screwdriver, secure the top and bottom screws to the left
and the right vertical mounting rails.
Chapter 2 Installing a Sun Fire V490 Server Into a 2-Post Rack
for
29