Prepare The Cabinet - Sun Microsystems Fire V490 Setup And Rackmounting Manual

Prepare the Cabinet

1. Open, and remove if applicable, the front and back doors of the cabinet.
See the instructions provided with your cabinet.
2. Stabilize the cabinet by extending its anti-tip legs or bolting the cabinet securely
to the floor.
See the instructions provided with your cabinet and read
Requirements" on page
3. Remove the side panels from the cabinet, if applicable.
See the instructions provided with your cabinet. Removing the side panels can
improve access to the nuts and screws that you install when securing the server in
the cabinet.
8 Sun Fire V490 Server Setup and Rackmounting Guide • August 2004
51.
"4-Post Cabinet