Preface - Sun Microsystems Fire V490 Setup And Rackmounting Manual

Preface

This guide provides instructions for installing the Sun Fire™ V490
server into a 4-post Sun™ expansion cabinet or other EIA-compliant
19-inch (48.26-cm) wide cabinet and into a 2-post rack. This guide also
provides instructions for installing a cable management arm,
connecting power cords, and connecting an Ethernet cable.
When you have completed the procedures in this guide, you are ready to set up a
system console, power on the server, install the Solaris™ Operating System, and
install the electronic documentation. See the Sun Fire V490 Server Quick Start Guide or
Part One of the Sun Fire V490 Server Administration Guide for information about these
procedures.
How This Book Is Organized
This book is organized into the following chapters.
Chapter 1 provides instructions for installing the server into a 4-post cabinet.
Chapter 2 provides instructions for installing the server into a 2-post rack.
Chapter 3 provides instructions for installing a cable management arm, connecting
power cords, and connecting an Ethernet cable.
vii