17 .4.23 Assembling The Autodecompressor - Husqvarna FS 450 2018 Repair Manual

·�
y

17 .4.23 Assembling the autodecompressor

Pull autodecompression shaft 4!} out of the camshaft.
304674-10
Release and remove autodecompression spring fi).
Info
Autodecompression weight
304675-10
Insert long flange
the hole, push the autodecompression spring over bearing
bolt 4!} and hook it into autodecompression weight fi).
304675-11
Mount autodecompression shaft
304674-11
Mount new lock ring@).
Perform a function check.
The autodecompression spring does not turn the autode­
compression shaft back to the stop:
Pre-tension the autodecompression spring more or
replace it.
304673-11
8
cannot be taken off.
O
of the autodecompression spring in
8
in the camshaft.
ENGINE 17
41
41
203