Assembling The Autodecompressor - Husqvarna FC 450 2014 Repair Manual

17 ENGINE
e�
y
17.4.20

Assembling the autodecompressor

Pull autodecompression shaft
304674-10
Release and remove autodecompression spring
Info
Autodecompression weight
304675-10
Insert long flange
the autodecompression spring over bearing bolt @ and hook it into
autodecompression weight
Mount autodecompression shaft
304674-11
Mount new lock ring (3.
Perform a function check.
The autodecompression spring does not turn the autodecompression shaft
back to the stop:
Pre-tension the autodecompression spring more or replace it.
304673-11
8
out of the camshaft.
C,
cannot be taken off.
O
of the autodecompression spring in the hole, push
8.
C,
in the camshaft.
8.
153