▶ Remove the two screws from the SAS expander board (see circles).
Figure 88: Removing the SAS expander board (B)
▶ Get the SAS expander board out of the two connectors of the HDD
backplane and remove it.
CAUTION
▶
Lift up the SAS expander board while removing it in order to
prevent the components to be damaged by the stand-offs (see A
in
Figure
Removing the defective 10x 2.5-inch HDD backplane
Figure 89: Removing the 10 x 2.5-inch HDD backplane
▶ Pull the HDD backplane upward until the six hooks disengage (see circles).
▶ Take out the HDD backplane.
RX1330 M4
Hard disk drive (HDD) / solid state drive (SSD)
88) of the chassis.
Upgrade and Maintenance Manual
A
A
169