Fujitsu PRIMERGY RX1330 M4 Upgrade And Maintenance Manual page 259

CAUTION
▶
Keep the dummy cover for future use.
▶
If you remove the accessible drive again and do not replace it with
a new one, the dummy cover must be reinstalled to comply with
EMC regulations and to satisfy cooling requirements and fire
protection measures.
Installing the ODD
Figure 169: ODD latch on fan bridge
▶ If no ODD has been installed before, remove the two screws and take the
ODD latch from the chassis.
RX1330 M4 Upgrade and Maintenance Manual
Accessible drives
259