Fujitsu PRIMERGY RX1330 M4 Upgrade And Maintenance Manual page 166

Hard disk drive (HDD) / solid state drive (SSD)
Figure 85: Connecting cables to the 4 x 2.5-inch PCIe SSD backplane
1 Oculink cable (black) to connector
"P4_X4"
2 Oculink cable (green) to connector
"P3_X3"
3 Oculink cable (yellow) to connector
"P2_X2"
▶ Connect all cables to the PCIe SSD backplane.
For the cable plans, see
Concluding steps
▶ Insert all HDD/SSD modules, see
on page 152.
Make sure that you reinstall the HDD/SSD module in the bay it was
located before the HDD backplane replacement.
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
166
4
5
6
"Appendix B" on page
"Installing 2.5-inch HDD/SSD modules"
52.
56.
58.
Upgrade and Maintenance Manual
Oculink cable (red) to connector
"P1_X1"
Power cable
OOB cable
365.
RX1330 M4