Connecting The Power Cord - Fujitsu PRIMERGY RX1330 M4 Upgrade And Maintenance Manual

Basic hardware procedures
4.6

Connecting the power cord

CAUTION
The server automatically adjusts to a mains voltage in the range from
100 V - 240 V.
▶
You may only operate the server if its rated voltage range
corresponds to the local mains voltage.
Standard power supply
▶ If applicable, connect the mains plug to a grounded mains outlet in the
inhouse power supply network.
▶ Connect the power cord to the PSU.
Figure 10: Locking the cable tie of a standard PSU
▶ Thread the cable tie through the eye (1).
▶ Pull the cable tie tight to secure the power cord (2).
The insulated connector cannot be disconnected from the server
accidentally.
You can loosen the cable tie by opening the small locking lever (2).
56 Upgrade and Maintenance Manual RX1330 M4