Fujitsu PRIMERGY RX1330 M4 Upgrade And Maintenance Manual page 241

11 Processor (CPU)
11.1 Safety notes
CAUTION
▶
Do not install unsupported CPUs. For more information on
supported CPUs, see
▶
Circuit boards and soldered parts of internal options are exposed
and can be damaged by static electricity. Always discharge static
build-up (e.g. by touching a grounded object) before handling
electrostatic sensitive devices (ESDs).
▶
Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.
▶
When removing or installing CPUs, be careful not to touch or bend
the spring contacts on the CPU sockets.
▶
Never touch the underside of the CPUs. Even minor soiling such as
grease from the skin can impair the CPU's operation or destroy the
CPUs.
▶
For more information, see
11.2 Basic information
Supported CPUs
– one Intel® Xeon® CPU E21xx or E22xx or Pentium or Core i3, up to 95 W,
up to 8 cores
– one CPU socket LGA 1151
For system relevant information, see the hardware configurator of your
server available online at the following address:
httpss://ts.fujitsu.com/products/standard_servers/index.htm
For Japan:
https://www.fujitsu.com/jp/products/computing/servers/primergy/
RX1330 M4
"Basic information" on page
"Important information" on page
Upgrade and Maintenance Manual
19.
29.
241