Fujitsu PRIMERGY RX1330 M4 Upgrade And Maintenance Manual page 305
Hide thumbs
Also See for PRIMERGY RX1330 M4:
- Customer service information bulletin (3 pages) ,
- Operating manual (106 pages)
Table of Contents
Advertisement
Installing the new TPM
The TPM spacer is already present on the system board.
▶ Install the TPM, see
Concluding steps
▶
"Installing the air duct" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶
"Resuming BitLocker functionality" on page
You can find information on configuring the TPM in the corresponding
BIOS Setup Utility reference manual.
15.5
iRMC microSD card
15.5.1
Note for embedded Lifecycle Management (eLCM)
The iRMC microSD card is necessary for using the embedded Lifecycle
Management (eLCM) functionality of the iRMC. It requires a valid eLCM
license key, which is always purchased together with the iRMC microSD
card and activated through the iRMC web interface.
For more information, see the "ServerView embedded Lifecycle
Management (eLCM)" user guide.
15.5.2
Installing the iRMC microSD card
Upgrade and Repair Unit
(URU)
RX1330 M4
"Installing the TPM" on page
64.
52.
58.
Upgrade and Maintenance Manual
System board and components
296.
56.
86.
Hardware: 5 minutes
305
Advertisement
Table of Contents
