Specific Hazards; Protecting Yourself And Others - Fronius Robacta TC 2000 Operating Instructions Manual

Specific hazards

Stay out of the working area of the robot.
The device must be incorporated into a higher-level safety system within a se-
cured area.
If this area has to be accessed when setup and maintenance work is carried out,
make sure that
-
-
In addition to these operating instructions, the safety rules issued by the robot
manufacturer must also be observed.
Covers and side panels may only be opened/removed while maintenance or repair
work is being carried out.
During operation:
-
-
Protecting your-
Electromagnetic fields may pose as yet unknown risks to health:
self and others
-
-
-
Magnetic fields generated by the high amperage can cause ferromagnetic parts
such as spatter accumulations to be ejected from the cleaning opening. To pre-
vent injury, never look into in the cleaning opening while the device is switched
on; protective goggles with side protection must be worn at all times.
Anyone working with the device exposes themselves to numerous risks e.g.:
-
-
-
-
-
Suitable protective clothing must be worn when working with the device. The
protective clothing must have the following properties:
-
-
-
-
-
the entire system is switched off for the duration of the work in this area
and that it is prevented from starting up accidentally, e.g., as the result of a
control fault
Ensure that all covers are closed and all side panels are fitted properly.
Keep all covers and side panels closed.
Effects on the health of persons in the vicinity, for example, those with pace-
makers, metallic implants and hearing aids
Forbidden for anyone wearing a pacemaker: people wearing a pacemaker
must consult their doctor before working with the device or entering its im-
mediate vicinity
Forbidden for anyone with metal implants: people who have had metal im-
plants fitted must consult their doctor before working with the device or en-
tering its immediate vicinity
flying sparks and hot pieces of metal
Arc radiation, which can damage eyes and skin
Risk of electrocution from mains current and welding current
Greater noise pollution
Harmful welding fumes and gases
Flame-resistant
Insulating and dry
Covers the whole body, is undamaged and in good condition
Safety helmet
Trousers with no turn-ups
7