Installing Mechanically-Controlled Wire Cutter On The Robacta Reamer Alu Edition And Robacta Reamer Alu 3000Upm (Optional); Installing The Mechanically-Controlled Wire Cutter - Fronius Robacta Reamer Alu Edition Manual

Installing mechanically-controlled wire cutter on the
Robacta Reamer Alu Edition and Robacta Reamer
Alu 3000upm (optional)
Installing the me-
chanically-con-
trolled wire cutter
Installation of the wire cutter is shown for the Robacta Reamer Alu Edition.
The wire cutter is installed in exactly the same way on the Robacta Reamer Alu 3000upm.
50
NOTE!
(2)
1
2
1
2
(3)
Position the mounting bracket (1) on
1
(1)
the wire cutter (2) as shown and screw
into place as described - using the fi-
xings supplied
Undo 3 screws and washers (3)
2
(3)
Remove cleaning device housing co-
3
ver (4)
(4)
(3)