Step 6. Install Center Link; Step 7. Install Batteries (2) - MacDon M150 Assembly Instructions Manual

STEP 6. INSTALL CENTER LINK

MECHANICAL LINK – M150 ONLY
a. Remove clevis pin from center link.
b. Position link between mounting brackets on front
frame and attach at lower hole location.
c. Install clevis pin and secure with hair pin.
HYDRAULIC LINK – M200 STD, M150 OPTION
The hydraulic center link is supplied in a
separate kit that is included with the shipment.
Refer to installation instructions in the kit.
Form # 169018
UNLOADING AND ASSEMBLY

STEP 7. INSTALL BATTERIES (2)

a. Open right hand (cab forward) maintenance
b. Remove cable ties securing battery clamps and
c. Position new batteries on holder (A).
d. Install clamp (B) with bolts (C) provided and
e. Attach negative (black) cable clamps (D) to
f.
g. Move platform back to closed position.
13
platform.
E
B
C
cables to frame.
RATING GROUP CCA VOLT
Heavy Duty,
Off-Road, BCI 29H or
750
Vibration 31A
Resistant
tighten securely.
IMPORTANT
BATTERY
GROUNDED. Always connect starter
cable to the positive (+) terminal of
battery and battery ground cable to
negative (-) terminal
Reversed polarity
alternator may result in permanent
damage to electrical system.
negative post on batteries and tighten clamps.
Attach positive (red) cable clamps (E) to positive
post on batteries and tighten. Reposition plastic
covers onto clamps.
C
D
A
MAX. DIMENSION
13.25x7.37x9.44 in.
12
(337x188x240 mm)
IS NEGATIVE
of battery.
in battery or
Model Year - 2009