Canon imageCLASS MF4690 Reference Manual page 96

Before Using the
Machine 1
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Using Group Addresses
■
To use this feature, you must register destinations in a group address
beforehand. (See "Storing/Editing Address Book, " on p. 4-9.)
1.
Set documents.
Place the first page on the platen glass if you are not using the ADF.
2.
Press [SEND/FAX].
3.
Press the one-touch key or [Coded Dial] followed
by the three-digit code under which the desired
address group is registered.
If you pressed a wrong key or code, press [Clear], and perform step 3
again.
If you want to adjust the image quality and density, see "Scan
Settings, " on p. 4-6.
Back Previous
4.
Press [Start].
When you set the documents on the platen glass, press [
to select the document size, then press [Start] for each document.
When scanning is complete, press [OK] to start sending.
When <TIME OUT> is set to <ON> in <TX SETTINGS> in <FAX
SETTINGS> in <TX/RX SETTINGS>, and if you have specified the
destination by any other method than using numeric keys, the
machine starts scanning automatically without pressing [Start], after
the preset time for this setting is elapsed.
TOP
Next
] or [ ]
4-22