Canon imageCLASS MF4690 Reference Manual page 84

Before Using the
Machine 1
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Storing/Editing One-Touch Keys/Coded
■
Dial Codes
Registering Fax Numbers
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <ADDRESS BOOK
SET.>, then press [OK].
3.
Press [ ] or [ ] to select <1-TOUCH SPD
DIAL> or <CODED SPD DIAL>, then press [OK].
4.
Press [ ] or [ ] to select a one-touch key (01
to 08) or coded dial code (000 to 191) for which
you want to register the fax number, then press
[OK].
You can also select a one-touch key or coded dial code by pressing
the corresponding one-touch key, or [Coded Dial] followed by the
desired three-digit code.
5.
Press [ ] or [ ] to select <FAX>, then press
[OK].
Back Previous
6.
Press [ ] or [ ] to select <TEL NUMBER
ENTRY>, then press [OK].
7.
Enter the fax number you register (max. 120
digits, including spaces and pauses) with the
numeric keys, then press [OK].
Ex.
T E L N U M B E R E N T R Y
0 1 2 X X X X X X X
8.
Press [ ] or [ ] to select <NAME>, then press
[OK].
9.
Enter the destination name (max. 16 letters,
including spaces) with the numeric keys, then
press [OK].
If you want to specify the following optional settings (<LONG
DISTANCE>, <TX SPEED>, and <ECM>) for the fax number you are
registering, proceed to the next step.
If you do not need to set these options, skip to step 18.
Ex.
N A M E
C a n
TOP
Next
: a
4-10